Garage Remote, Keypad and Smart Opener Setup in Vancouver
We program and replace remotes, outdoor keypads and car buttons, and set up smart controllers so you can open and check the door from your phone.
- Most remote and keypad jobs run $100–$300 including the device
- Most visits take 30 minutes to 1 hour
- A remote that only works up close usually has a weak battery
We call back to confirm a time. Or call 778-949-8578.
- Mon–Sat, 7am–7pm
- 15 cities across Metro Vancouver
- Homes and townhouses only
Garage remote and keypad programming in Vancouver usually runs $100–$300 including the device, and most jobs take 30 minutes to 1 hour. We pair new remotes and keypads, connect built-in car buttons, clear lost or stolen remotes from the opener's memory, and install smart controllers. Smart controller pricing depends on your opener and the Wi-Fi signal in the garage.
- Clearing the opener's memory stops lost or stolen remotes from working
- Smart controllers need a compatible opener and usable Wi-Fi in the garage
Remote and keypad problems we sort out
- Remote only works right outside the door. A weak battery is the most common reason. LED bulbs in the opener and some other electronics can also interfere with the signal.
- Lost a remote. We clear the opener's memory so the missing one stops working, then pair the remotes you still have.
- Keypad stopped working. Often a dead battery or worn contacts. If the keypad is failing, we replace it.
- Car button won't pair. Newer openers use rolling-code systems, and some cars need an adapter to work with them.
- Moved in and none of the remotes work. We clear the old codes and set up new remotes for you.
- Want to check the door from your phone. We install a smart controller.
Smart controllers and phone access
A smart controller lets you open and close the door from your phone and check whether you left it open. Many openers made in the last 15 to 20 years can take one, but it varies by brand and model.
The garage also needs a usable Wi-Fi signal. Garages are often at the far end of the house, behind concrete or under living space, and the signal can drop off. We check the signal before we install. If it is weak, an extender near the garage usually fixes it.
If your opener is too old for a smart controller, a new opener with built-in Wi-Fi may be the simpler choice. We can tell you which applies when we see the model.
Cost and what to have ready
Most remote and keypad jobs run $100–$300 including the device. Smart controller installs depend on the opener and the Wi-Fi coverage in the garage.
To get the right part the first time, have these ready when you call:
- The opener's brand and model, from the label on the motor housing
- How many remotes you want working
- Your car's make and year if you want the built-in button paired
Universal remotes work with many openers but not all, so the brand and model matter. Most visits take 30 minutes to 1 hour.
Other services
Door repairWe fix doors that are off track, crooked, noisy or damaged, including cables, rollers, hinges, tracks, bottom seals and dented panels.Learn more →
SpringsWe replace broken torsion and extension springs and set the tension so the door balances properly.Learn more →
New doorsWe supply and install new residential garage doors, from single doors on laneway garages to insulated double doors on attached garages.Learn more →
Opener repairWe fix openers that hum, click, reverse or do nothing at all.Learn more →
Opener installsWe install new chain, belt and wall-mount openers and take away the old one.Learn more →
Questions homeowners ask
Why does my remote only work up close?
A weak battery is the most common reason. LED bulbs in the opener and some other electronics can also interfere with the signal.
Can I stop a lost remote from working?
Yes. Clearing the opener's memory erases every paired remote and keypad. Then we pair the ones you still have.
Will a smart controller work with my opener?
Many openers made in the last 15 to 20 years can take one, but it depends on the brand and model. The garage also needs a usable Wi-Fi signal.
Why won't my car's built-in button pair?
Newer openers use rolling-code systems, and some cars need an adapter for them. The pairing steps also differ by car and opener brand.
Can I get a universal remote?
Universal remotes work with many openers, but not all. Give us your opener's brand and model so we pick one that works.
I just moved in. Should I reset the remotes?
Yes. You don't know how many remotes the previous owners handed out. We clear the opener's memory and pair new ones for you.
Remotes & keypads by city
Before you call
- How to Check Your Garage Door Before the First Hard Frost in Maple RidgeA quick fall check can show a weak spring or stiff door before cold weather hits Maple Ridge. Here is what to look at, what to leave alone, and when to call.
- Repair or replace: is your old Vancouver lane garage door worth fixing?How to tell whether an old garage door off a Vancouver lane needs a part repair or a full replacement, with simple checks you can do yourself first.
- Garage door off its track in White Rock: what to do and what not to doYour door is hanging crooked and the car is inside. Here is how to make it safe, what to check from a distance, and what the repair involves in White Rock.
- Is it the opener or the door? A quick check for Richmond homeownersBefore you replace a garage door opener in Richmond, run this ten-minute check of the door, the hardware and the safety sensors to find the real problem.
Get your remotes and keypad working
Call or send the form with your opener's brand and model and what you need paired. Most visits take under an hour.