
Surrey Garage Remote and Keypad Programming After a Move
Moved into a Surrey house and none of the remotes work? That's one of our most common calls here. We reprogram remotes, keypads and car buttons and clear old codes.
- Surrey remote and keypad jobs run $100–$300 including the device
- Most take 30 minutes to 1 hour
- After a move, clear the opener's memory so old remotes stop working
We call back to confirm a time. Or call 778-949-8578.
- Mon–Sat, 7am–7pm
- 15 cities across Metro Vancouver
- Homes and townhouses only
Remote and keypad programming in Surrey typically costs $100–$300 including the device and takes 30 minutes to 1 hour. Reprogramming remotes after a move is a frequent Surrey call, from Clayton Heights townhouses to Newton and Fleetwood family homes. We clear the previous owner's codes, pair your remotes and keypad, set up car buttons and install smart controllers so you can check the door from your phone.
- Original openers on 1980s and 1990s homes may not take a smart controller
- Families using the garage as the main entry benefit from an outdoor keypad
Just moved in? Start with the codes
When you buy a house, you don't know how many remotes the previous owners handed out. Clearing the opener's memory erases every paired remote and keypad. We then pair the remotes you have, add new ones if needed, and set a fresh keypad code.
If none of the remotes work at all, the batteries may be dead, or the remotes may not match the opener. We bring compatible ones. Tell us the opener's brand and model when you book so we have the right remote on hand.

Keypads and car buttons for busy households
Many Surrey homes use the garage as the main entry. An outdoor keypad saves handing out keys or remotes to kids, sitters and family. If your keypad has stopped working, it's often the battery or lost pairing, and sometimes the keypad itself needs replacing.
Car buttons are handy in multi-car households. Newer openers use rolling-code systems, and some cars need an adapter to pair. The steps vary by car and opener brand. Universal remotes work with many openers but not all.
Smart control on older and newer openers
A smart controller lets you open the door, and check whether you closed it, from your phone. Many openers made in the last 15 to 20 years can take one, though it varies by brand and model.
Lots of 1980s and 1990s homes in Newton and Fleetwood still run their original openers, which may be too old. In that case, an opener upgrade with built-in phone control may make more sense. Newer homes on Panorama Ridge and in Morgan Creek usually have compatible openers. The garage needs a usable Wi-Fi signal either way.
What we see in Surrey
- Remotes needing reprogramming after a move is one of the most common Surrey calls.
- Lots of 1980s and 1990s homes in Newton and Fleetwood still have original openers that may not support smart controllers.
- Many homes use the garage as a main entry, so an outdoor keypad is useful for the whole family.
- Townhouse complexes in Clayton and Grandview may have strata rules on opener types, which can affect smart upgrades.
- We also serve New Westminster, Port Coquitlam, Port Moody and Coquitlam.
- Cloverdale
- Newton
- Guildford
- South Surrey
- Fleetwood
- Whalley
- Panorama Ridge
- Clayton Heights
- Morgan Creek
- Sullivan
More in Surrey
Door repairWe fix doors that are off track, crooked, noisy or damaged, including cables, rollers, hinges, tracks, bottom seals and dented panels.Learn more →
SpringsWe replace broken torsion and extension springs and set the tension so the door balances properly.Learn more →
New doorsWe supply and install new residential garage doors, from single doors on laneway garages to insulated double doors on attached garages.Learn more →
Opener repairWe fix openers that hum, click, reverse or do nothing at all.Learn more →
Opener installsWe install new chain, belt and wall-mount openers and take away the old one.Learn more →
Questions homeowners ask
None of the remotes worked when we moved in. What do we do?
We clear the old codes and pair new remotes and a keypad. Have the opener's brand and model ready when you call.
Can I stop the previous owner's remotes from working?
Yes. Clearing the opener's memory erases all paired remotes and keypads. Then we pair the ones you keep.
Will a smart controller work with my old opener?
Many openers from the last 15 to 20 years can take one. Older originals may not, and an opener with built-in phone control may be better.
What does remote programming cost in Surrey?
Most remote and keypad jobs run $100–$300 including the device. Smart controller installs depend on the opener and Wi-Fi.
Why won't my car's button pair?
Newer openers use rolling-code systems that some cars need an adapter for. The steps differ by car and opener brand.
Nearby areas
Reprogram your Surrey remotes
Call or send the form with the opener brand and model. We work Mon–Sat, 7am–7pm, and most jobs take under an hour.