Roll-Up and Rolling Steel Door Repair in Vancouver
We repair rolling steel doors, roll-up shutters and counter grilles on Vancouver storefronts, warehouses, storage units and strata buildings.
Downtown Vancouver skyline with the North Shore mountains, Vancouver
Roll-up door repair in Vancouver covers curtains jammed in their guides, dented slats, doors that won't stay up or are hard to lift, bent bottom bars, worn weather strips and motors that hum without moving the curtain. Most adjustments and slat repairs take a few hours. Vancouver's long wet season is the main enemy, because damp guides collect grit and the bottom strip wears where water sits.
- A roll-up that is hard to lift usually needs spring tension adjusted or its guides cleaned.
- Standard-profile slats can often be replaced without a new curtain.
- Months of rain from October to April wear bottom strips and leave grit in the guides.
- Storefront shutters and counter grilles are repaired the same way as larger rolling doors.
Storefront shutters on Vancouver's commercial streets
Many Vancouver shops close up behind a rolling shutter or grille at night, from Mount Pleasant to Kitsilano to Renfrew-Collingwood. These doors go up and down every day, often by hand, and they sit out in the rain.
The common faults are a shutter that drags in its guides, one that won't stay up, and a bottom bar bent from being pulled down hard or hit by a cart. We clean and adjust the guides, set the spring tension so the curtain balances, and straighten or replace the bottom bar. If the lock no longer lines up, we adjust or replace it.
Warehouse and storage doors
Larger rolling steel doors on warehouses and storage units take impacts from forklifts and vehicles. A dented slat can catch in the guide and jam the whole curtain. Standard-profile slats can usually be swapped on their own. Badly bent or rusted curtains are sometimes better replaced as a whole, and we will tell you which makes more sense.
If a motorized door hums but the curtain doesn't move, stop pressing the button. The motor, brake or a jammed curtain can all cause it, and running it again can make the damage worse.
What goes into a quote
The quote depends on the door's width and height, the slat profile, how many slats are damaged, whether the door is manual or motorized, and whether a new curtain is needed. Photos of the door, the guides and the bottom bar help us bring the right parts.
We work Monday to Saturday, 7am to 7pm, and can usually come before a shop opens. We also cover North Vancouver, Burnaby, Richmond and New Westminster.
What we see in Vancouver
Kitsilano · Mount Pleasant · Kerrisdale · Dunbar · Hastings-Sunrise · Marpole
- Most of Vancouver's rain falls between October and April, which wears bottom strips and fills guides with grit.
- Shops across Mount Pleasant, Kitsilano and Renfrew-Collingwood often close behind rolling shutters that run every day.
- Damp weather year-round means guides and slats need cleaning and lubrication more often than in drier places.
- Cold snaps are rare, but they make tired springs and stiff curtains show up quickly.
Questions we get
Our shutter is getting harder to lift every week. What is wrong?
Usually the spring tension has dropped, or the guides are dirty or bent. Adjusting the tension and cleaning the guides fixes many doors.
Can you replace only the dented slats?
Often, if the slats are a standard profile. A curtain that is badly bent or rusted along its length may be better replaced as a whole.
Do you repair the grilles that close over our counter?
Yes. Counter grilles, window shutters and storefront security shutters are all repaired.
Can our manual roll-up be motorized?
Many can, if the curtain and barrel are in good shape. We fit an operator sized for the door, along with safety controls.
Can the repair be done before we open?
Often. We work Monday to Saturday from 7am, so most storefront repairs can be done before customers arrive.
More in Vancouver
- Overhead doorsWe repair sectional overhead doors on shops, warehouses, service bays and industrial units: broken springs and cables, bent sections and track, worn rollers and hinges, and doors knocked off track by a truck or forklift.
- Parkade doorsWe repair the overhead doors and gates at strata and commercial parkade entrances: the door, its operator, safety edges and photo eyes, and the receiver that the fobs and remotes talk to
- OperatorsWe repair and install the motors that run commercial overhead doors: trolley, jackshaft and hoist operators, wall controls, photo eyes and safety edges
- MaintenanceWe service commercial overhead, roll-up and parkade doors on a schedule: lubrication, spring and cable checks, balance and safety tests, and small repairs before they stop the door
Nearby
Advice
- What a fall service visit should cover on commercial and parkade doorsA plain checklist for property managers and strata councils in Vancouver: what a fall door service should test, adjust and write up before the cold and wet months.
- Keeping roll-up doors and shutters working through a wet, salty winterDamp air, wind off the water and a high water table are hard on rolling steel doors in Richmond. What to clean, check and fix before the worst of the winter.
Get a Vancouver roll-up door fixed
Call or send the form with the door size and a few photos. We will book a time that keeps your shop or warehouse open.
We'll call you back.