Commercial Door Operators in New Westminster
Older manual doors that need motors, busy condo parkades and tight sites shape operator work in New Westminster. We repair and install commercial door operators, controls and safety devices.
Pier Park and the Fraser River, New Westminster
Commercial door operator work in New Westminster includes adding operators to older manual doors, repairing motors that hum without moving, doors that only run while the button is held, overheating on busy condo parkade doors, and safety devices that keep reversing. Many older buildings still have manual doors or older spring systems. Uptown and Downtown condo buildings run doors that cycle all day.
- Many older manual doors can be motorized if they are balanced and in good condition.
- Uptown and Downtown condo parkades need operators sized for heavy use.
- Tight sites and limited space above the door can favour a jackshaft operator.
- Most commercial operators need a dedicated electrical circuit.
Motorizing older manual doors
New Westminster has some of the oldest building stock in the region, and many older doors are still manual or run on older spring systems. Adding an operator is usually possible if the door is balanced and in good condition.
We check the door first. Worn springs or a door that is out of balance have to be fixed before an operator goes on. Then we choose an operator that suits the door's size, weight and use, and confirm there is a dedicated circuit.
Busy condo parkade doors
Uptown and Downtown are mostly low-rise and high-rise condos, and their parkade doors cycle constantly. Operators on those doors overheat if undersized, and safety devices get knocked out of line.
If the door only closes while the button is held, the operator has lost its safety signal. We realign or replace photo eyes and safety edges and test the reversal. Quotes go to the strata or manager.
Tight spaces and booking
Steep lots and tight lane access can limit what fits around the door. A jackshaft operator beside the door suits low ceilings or spaces where the area above the door is taken.
Most repairs take a few hours, and a new install takes about a day. We work Monday to Saturday, 7am to 7pm, and also cover Surrey, Burnaby, Port Coquitlam and Coquitlam.
What we see in New Westminster
Queen's Park · Sapperton · Queensborough · Uptown · Downtown · Glenbrooke North
- Many older buildings in Queen's Park and Sapperton still have manual doors or older spring systems.
- Uptown and Downtown are mostly condos with parkade doors that cycle all day.
- Steep lots and tight lane access can limit operator placement.
- Queensborough's newer townhouses have modern doors and operators.
Questions we get
Can our old manual door be motorized?
Usually, if the door is balanced and in good condition. We check the springs and balance before fitting an operator.
Why does our parkade door only close while the button is held?
The operator has lost the signal from its safety devices, usually misaligned photo eyes or a failed safety edge.
What is a jackshaft operator?
A motor mounted beside the door on the shaft instead of overhead, suited to low ceilings or crowded space above the door.
Does the door need its own power supply?
Most commercial operators need a dedicated electrical circuit. It is checked when an install is quoted.
How long does a commercial operator last?
It depends on how often the door cycles. A busy parkade door wears an operator out faster, and parts for older units get hard to find.
More in New Westminster
- Overhead doorsWe repair sectional overhead doors on shops, warehouses, service bays and industrial units: broken springs and cables, bent sections and track, worn rollers and hinges, and doors knocked off track by a truck or forklift.
- Roll-up doorsWe repair rolling steel doors and roll-up shutters on storefronts, warehouses, storage units and service counters: slats, guides, bottom bars, spring tension, locks and the motors that run them.
- Parkade doorsWe repair the overhead doors and gates at strata and commercial parkade entrances: the door, its operator, safety edges and photo eyes, and the receiver that the fobs and remotes talk to
- MaintenanceWe service commercial overhead, roll-up and parkade doors on a schedule: lubrication, spring and cable checks, balance and safety tests, and small repairs before they stop the door
Nearby
Advice
Talk to us about a New Westminster operator
Call or send the form with the door, the operator brand if there is one, and what you need. We will plan around your building.
We'll call you back.